feel free to add the links to your guide if you want. Just thought i'd share these two links in this thread for anyone who might encounter similar issues. After a lot of experimenting I was able to find a workaround for the problem which i wrote about in the following post :. Its possible that this issue is either specific to a select few laptops or the firmware flashed into the clone DW1830 cards bought on eBay. On my HP Spectre X360 the DW1830 WiFi suffers from poor wifi performance after sleep/wake which is not related to Wake on Lan. I wrote about my findings in the following post :-ĭW1830 - Poor WiFi performance after sleep/wake in this instance the device will not been seen on the PCI (or USB) bus and will not be isolated to just MacOS but any OS that you have installed, and no its not because or a white or black list (at least in my case).įor me the issue seems to lie in the BIOS logic for controlling the WiFi & BT enable lines on the M.2 card (pins 54 & 56) and can be resolved by taping/masking these pins. ![]() On a some laptops the WiFi and/or BT may not work OTB after installing the required kext's and patches. however on some laptops it may not work OTB or suffer from poor wifi performance after sleep/wake. Just thought i'd let you know that I have had very good success with BCM43602 (DW1830). Nice to see that you created a new up-to-date guide on this subject. ![]() AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0. Building a CustoMac Hackintosh: Buyer's Guide The AirPort Extreme (0x14E4, 0x8D) firmware got updated when I installed 10.8.2.
0 Comments
Leave a Reply. |